分流2校验文件

SmileGR · 发表于 2007-10-11 09:20:57

出现 .abort文件后，0字节文件不能校验了

kent777 · 发表于 2007-10-11 12:25:47

以前出现过这种情况不?

SmileGR · 发表于 2007-10-11 13:33:57

这些天总出现

kent777 · 发表于 2007-10-11 15:15:21

回头盯着脚本消息看,我需要详细错误信息.

SmileGR · 发表于 2007-10-11 16:22:47

有时候会出现这种状况，不知道跟这个有没有关系
(16:17:23) [2] PORT 211,160,167,18,15,84
(16:17:23) [2] 200 PORT Command successful.
(16:17:23) [2] STOR ast-310ty-a.r36
(16:17:23) [2] 425 Try later, data connection in use.
(16:17:23) [1] PASV
(16:17:23) [1] 227 Entering Passive Mode (211,160,167,18,171,162)
(16:17:23) [2] PORT 211,160,167,18,171,162
(16:17:23) [2] 200 PORT Command successful.
(16:17:23) [2] STOR ast-310ty-a.r36
(16:17:23) [2] 425 Try later, data connection in use.
(16:17:23) [1] PASV
(16:17:23) [1] 227 Entering Passive Mode (211,160,167,18,140,60)
(16:17:23) [2] PORT 211,160,167,18,140,60
(16:17:23) [2] 200 PORT Command successful.
(16:17:23) [2] STOR ast-310ty-a.r36
(16:17:23) [2] 425 Try later, data connection in use.
(16:17:23) [1] PASV
(16:17:23) [1] 227 Entering Passive Mode (211,160,167,18,250,181)
(16:17:23) [2] PORT 211,160,167,18,250,181
(16:17:23) [2] 200 PORT Command successful.
(16:17:23) [2] STOR ast-310ty-a.r36
(16:17:23) [2] 425 Try later, data connection in use.
(16:17:23) [1] PASV
(16:17:23) [1] 227 Entering Passive Mode (211,160,167,18,175,155)
(16:17:23) [2] PORT 211,160,167,18,175,155
(16:17:23) [2] 200 PORT Command successful.
(16:17:23) [2] STOR ast-310ty-a.r36
(16:17:23) [2] 425 Try later, data connection in use.
(16:17:23) [1] PASV
(16:17:24) [1] 227 Entering Passive Mode (211,160,167,18,6,20)
(16:17:24) [2] PORT 211,160,167,18,6,20
(16:17:24) [2] 200 PORT Command successful.
(16:17:24) [2] STOR ast-310ty-a.r36
(16:17:24) [2] 425 Try later, data connection in use.
(16:17:24) [1] PASV
(16:17:24) [1] 227 Entering Passive Mode (211,160,167,18,83,152)
(16:17:24) [2] PORT 211,160,167,18,83,152
(16:17:24) [2] 200 PORT Command successful.
(16:17:24) [2] STOR ast-310ty-a.r36
(16:17:24) [2] 425 Try later, data connection in use.
(16:17:24) 文件传输失败: ast-310ty-a.r36
(16:17:24) [1] PASV
(16:17:24) [1] 227 Entering Passive Mode (211,160,167,18,100,8)
(16:17:24) [2] PORT 211,160,167,18,100,8
(16:17:24) [2] 200 PORT Command successful.
(16:17:24) [2] STOR ast-310ty-a.r35
(16:17:24) [2] 425 Try later, data connection in use.
(16:17:24) [1] PASV
(16:17:24) [1] 227 Entering Passive Mode (211,160,167,18,117,28)
(16:17:24) [2] PORT 211,160,167,18,117,28
(16:17:24) [2] 200 PORT Command successful.
(16:17:24) [2] STOR ast-310ty-a.r35
(16:17:24) [2] 425 Try later, data connection in use.
(16:17:24) [1] PASV
(16:17:24) [1] 227 Entering Passive Mode (211,160,167,18,73,62)
(16:17:24) [2] PORT 211,160,167,18,73,62
(16:17:24) [2] 200 PORT Command successful.
(16:17:24) [2] STOR ast-310ty-a.r35
(16:17:24) [2] 425 Try later, data connection in use.
(16:17:24) [1] PASV
(16:17:25) [1] 227 Entering Passive Mode (211,160,167,18,251,132)
(16:17:25) [2] PORT 211,160,167,18,251,132
(16:17:25) [2] 200 PORT Command successful.
(16:17:25) [2] STOR ast-310ty-a.r35
(16:17:25) [2] 425 Try later, data connection in use.
(16:17:25) [1] PASV
(16:17:25) [1] 227 Entering Passive Mode (211,160,167,18,97,246)
(16:17:25) [2] PORT 211,160,167,18,97,246
(16:17:25) [2] 200 PORT Command successful.
(16:17:25) [2] STOR ast-310ty-a.r35
(16:17:25) [2] 425 Try later, data connection in use.

SmileGR · 发表于 2007-10-11 16:39:59

文件ast-310ty-a.r33 出现abort问题显示如下
好像前面有个代码426，正常的我看前面有个代码226

(16:32:57) [1] TYPE I
(16:32:57) [1] 200 Type set to I.
(16:32:57) [2] TYPE I
(16:32:57) [2] 200 Type set to I.
(16:32:57) [1] PASV
(16:32:57) [1] 227 Entering Passive Mode (211,160,167,18,254,116)
(16:32:57) [2] PORT 211,160,167,18,254,116
(16:32:57) [2] 200 PORT Command successful.
(16:32:57) [2] STOR ast-310ty-a.r33
(16:32:57) [2] 150 Opening BINARY mode data connection for ast-310ty-a.r33.
(16:32:57) [1] RETR ast-310ty-a.r33
(16:33:18) [1] 150 Data connection accepted from 218.28.223.25:1233; transfer starting for /DVD/3.10.To.Yuma.PROPER.R5.LiNE.XviD-ASTEROiDS/CD1/ast-310ty-a.r33 (15000000 bytes)
(16:33:18) [1] 426-Using U/D Ratio 1/3. Current credit 4.571 TBytes, counting bytes over all sessions.
(16:33:18) [1] 426 Retrieve aborted; Transfer ok
(16:33:18) 忽略 ast-310ty-a.r33
(16:33:18) [1] PASV
(16:33:18) [1] 227 Entering Passive Mode (211,160,167,18,6,231)
(16:33:18) [2] PORT 211,160,167,18,6,231
(16:33:19) [2] 200 PORT Command successful.
(16:33:19) [2] STOR ast-310ty-a.r32
(16:33:19) [2] 150 Opening BINARY mode data connection for ast-310ty-a.r32.
(16:33:19) [1] RETR ast-310ty-a.r32
(16:33:19) [1] 150 Data connection accepted from 218.28.223.25:1233; transfer starting for /DVD/3.10.To.Yuma.PROPER.R5.LiNE.XviD-ASTEROiDS/CD1/ast-310ty-a.r32 (15000000 bytes)
(16:34:21) [1] 226-Using U/D Ratio 1/3. Current credit 4.571 TBytes, counting bytes over all sessions.
(16:34:21) [1] 226 File sent ok.
(16:34:21) [2] 226 Transfer complete.

SmileGR · 发表于 2007-10-11 16:50:02

另外分流3的搬运帐号好像相隔一定时间就自动断开（一定时间不动作就断开帐号），分流2搬运帐号好像就可以不自动断开，不知道跟这个有没有关系
不过分流2帐号，如果我这里网络有时断线，当我的网络恢复后，然后我想手工断开再重新连接，就经常出现421:(

SmileGR · 发表于 2007-10-11 16:52:22

又出了个426

(16:46:51) [1] PASV
(16:46:51) [1] 227 Entering Passive Mode (211,160,167,18,141,231)
(16:46:51) [2] PORT 211,160,167,18,141,231
(16:46:51) [2] 200 PORT Command successful.
(16:46:51) [2] STOR ast-310ty-a.r03
(16:46:51) [2] 150 Opening BINARY mode data connection for ast-310ty-a.r03.
(16:46:51) [1] RETR ast-310ty-a.r03
(16:47:12) [1] 150 Data connection accepted from 218.28.223.25:1233; transfer starting for /DVD/3.10.To.Yuma.PROPER.R5.LiNE.XviD-ASTEROiDS/CD1/ast-310ty-a.r03 (15000000 bytes)
(16:47:13) [1] 426-Using U/D Ratio 1/3. Current credit 4.57 TBytes, counting bytes over all sessions.
(16:47:13) [1] 426 Retrieve aborted; Transfer ok
(16:47:13) 忽略 ast-310ty-a.r03

SmileGR · 发表于 2007-10-11 16:59:04

这个ast-310ty-b.r45 的abort和上面的不同

(16:48:09) [1] PASV
(16:48:09) [1] 227 Entering Passive Mode (211,160,167,18,18,223)
(16:48:09) [2] PORT 211,160,167,18,18,223
(16:48:09) [2] 200 PORT Command successful.
(16:48:09) [2] STOR ast-310ty-b.r45
(16:48:09) [2] 425 Try later, data connection in use.
(16:48:09) [1] PASV
(16:48:09) [1] 227 Entering Passive Mode (211,160,167,18,94,229)
(16:48:09) [2] PORT 211,160,167,18,94,229
(16:48:10) [2] 200 PORT Command successful.
(16:48:10) [2] STOR ast-310ty-b.r45
(16:48:10) [2] 425 Try later, data connection in use.
(16:48:10) [1] PASV
(16:48:10) [1] 227 Entering Passive Mode (211,160,167,18,239,250)
(16:48:10) [2] PORT 211,160,167,18,239,250
(16:48:10) [2] 200 PORT Command successful.
(16:48:10) [2] STOR ast-310ty-b.r45
(16:48:10) [2] 226 Transfer complete.
(16:48:10) 文件传输失败: ast-310ty-b.r45
(16:48:10) [1] PASV
(16:48:10) [1] 227 Entering Passive Mode (211,160,167,18,7,22)
(16:48:10) [2] PORT 211,160,167,18,7,22
(16:48:10) [2] 550 /-=movie=-/3.10.To.Yuma.PROPER.R5.LiNE.XviD-ASTEROiDS/CD2/ast-310ty-b.r44: No such file.
(16:48:10) [1] 开始反向FXP
(16:48:10) [2] 426 Data connection closed, receive file ast-310ty-b.r45 aborted.
(16:48:10) [2] PASV
(16:48:10) [2] 200 PORT Command successful.
(16:48:10) [2] 227 Entering Passive Mode (218,28,223,25,12,151)
(16:48:10) [1] PORT 218,28,223,25,12,151
(16:48:10) [1] 200 Port command successful.
(16:48:10) [2] STOR ast-310ty-b.r44
(16:48:11) [1] RETR ast-310ty-b.r44
(16:48:11) [1] 150 Opening data connection for ast-310ty-b.r44 (15000000 bytes)
(16:48:11) [2] 150 Opening BINARY mode data connection for ast-310ty-b.r44.

kent777 · 发表于 2007-10-11 17:08:13

分流3 X到分流2？
试过非分流3 X到分流2吗？

		自动登录	找回密码
密码			立即注册

分流2校验文件

本帖子中包含更多资源

浏览过的版块